Harmak, Özeniş and Ulutaş Springs
Two separate springs working on Harmak machines — in the baler and hay rake groups. The turbo baler spring is covered by the same item on Özeniş and Ulutaş machines as well.
Harmak items in our catalogue
This page covers three makes together, for a concrete reason: the turbo baler spring in our catalogue works on Harmak, Özeniş and Ulutaş machines alike — one item, three makes. It is a situation met often in the field but rarely written down. Rather than hunting under three separate brand names, asking for the one item is enough.
The reason is not that the makes copy one another but that the same pickup group design is used across these machines. Body dimensions and leg form are the same on all three, so the spring is the same. Even so, the only sure check is dimensions: even if your machine is one of these three, if the wire diameter or body inner diameter of the part in your hand differs from what is expected, it is produced to order.
Harmak also appears in a second group in our catalogue: the hay rake spring. These two items are completely different springs and should not be confused. The baler spring works to the compression and tying cycle; the hay rake spring is a wire form spring working on the torsion principle, where the body coil twists and the leg bends. That is why it matters to state which machine group you mean when ordering.
On the hay rake side the typical failure of this family is not breakage but opening out: as the leg angle widens the tine no longer grips the crop and starts skimming over the field. On the baler side the sign is loss of free length and falling bale density. Two groups, two different signs to watch.
Product list — 2 items
The items below are supplied from stock or made to order. The link at the end of each row carries the product into the quote form.
| No | Product name | |
|---|---|---|
| 70 | Harmak hay rake spring | Request a quote |
| 100 | Harmak / Özeniş / Ulutaş turbo baler spring | Request a quote |
Related machine groups
This brand's items sit in the groups below. The group pages also list the other brands produced for the same machine.
How it is made
Every step after coiling happens in our own plant; nothing is outsourced. This shortens lead times and keeps quality responsibility in one pair of hands.
CNC coiling
Formed across the 0.20–40 mm wire range.
Tempering
Stress is relieved; elasticity becomes permanent.
End grinding
Seating faces are flattened on compression springs.
Galvanising
Surface protection against corrosion.
Packing
Domestic and export logistics included.
Frequently asked questions
Are the Harmak, Özeniş and Ulutaş springs really the same?
The turbo baler spring is covered by the same item on all three — it appears once in our catalogue. The reason is that the same pickup group design is used across these machines. Even so, the sure check is dimensions.
My machine is one of these three but the dimensions do not match — what then?
It is produced to order. Because our coiling line is not tied to tooling, a different wire diameter or body inner diameter is simply coiled to that size; send a sample or the dimensions.
Is the Harmak baler spring the same as the Harmak hay rake spring?
No — two completely different springs. The baler spring works to the compression and tying cycle; the hay rake spring is a wire form spring working on the torsion principle. State which machine group you mean when ordering.
How do I know when a hay rake spring needs replacing?
In this family the typical failure is opening out rather than breakage. If the leg angle has widened against the original and the tine skims over the field instead of gripping the crop, the spring has fatigued.
What sign should I watch on the baler spring?
Loss of free length. Once free length shortens permanently, bale density drops; that is signal enough to decide without waiting for breakage.
Other brand pages
About the brand names
Metiş Yay is an independent spring manufacturer. The machine brand names on these pages are used solely to indicate which machines our products fit; they do not imply any authorised dealership, distributorship or official association with any brand. All brand names belong to their respective owners.
Cannot find the spring you need?
We produce to your dimensions in the 0.20–40 mm wire range, with no tooling dependency. A sample, a technical drawing, or simply a photograph of the old spring is enough.
Fill in the quote formOr call us directly: 0850 840 54 17