Hay rake spring — silver / gold
Torsion type wire form spring, U legs, in various coatings.
We have been manufacturing steel springs since 1978. From 0.20 mm to 40 mm wire diameter, we coil the springs agricultural machinery needs — from balers to seed drills, from combine harvesters to hay rakes.
From compression springs to torsion forms, from wire-form parts to pins — real products from our production line.
Torsion type wire form spring, U legs, in various coatings.
Same geometry in three different body lengths.
Torsion springs in black, gold and silver coating.
Four torsion spring variants in different leg forms.
Torsion springs produced at different leg angles.
Long-legged rake tines in orange and cream.
Wide-angle pickup spring in orange and cream coating.
Wide-bodied rake spring in silver and yellow coating.
Galvanized compression springs in various diameters and lengths — heat treated after coiling.
Thick-wire, red-coated heavy industrial compression spring.
Black-coated, thick-wire compression spring.
S-hook and loop-hook extension springs in three lengths.
Extension springs with different hook types.
Long-bodied extension spring with loop hooks at both ends.
Small conical springs — electronics and battery contact applications.
Triangular wire form and two-legged U form parts.
Double swing spring with S hooks and close-wound coils.
R-clip type hairpin clips in ten different sizes.
Three D-form pins with spring rings.
Five S hook examples in different lengths and materials.
Long-legged, double-coiled rake spring.
Compression, extension and torsion springs in small sizes together.
Every spring we manufacture for balers, combine harvesters, seed drills, forage harvesters, hay rakes, sprayers, cultivators and beet harvesters. Type your machine brand — Krone, John Deere, Massey Ferguson, Laverda, Gaspardo, Claas, New Holland, Pöttinger.
| No. | Product name | Machine group |
|---|---|---|
| 01 | 3 mm Hairpin clip | Baler |
| 02 | 4 mm Hairpin clip | Baler |
| 03 | 5 mm Hairpin clip | Baler |
| 04 | 2.5 mm Fork adjustment lever spring | Baler |
| 05 | 3.5 mm Upper pad compression spring | Baler |
| 06 | 4 mm Cradle pad compression spring | Baler |
| 07 | 4 mm Cabinet lid spring | Baler |
| 08 | 6 mm Safety pad spring | Baler |
| 09 | 6 mm Rake ratchet compression spring | Baler |
| 10 | 6 mm Pickup spring | Baler |
| 11 | 8 mm Fork spring | Baler |
| 12 | Bale release spring | Baler |
| 13 | Bale retaining latch compression spring | Baler |
| 14 | Claas rake spring | Baler |
| 15 | Cup spring | Baler |
| 16 | Gallignani type adjustment lever spring | Baler |
| 17 | Rope and hose holder spring | Baler |
| 18 | Hammer and John Deere pickup spring | Baler |
| 19 | Twine guide spring | Baler |
| 20 | Cam latch spring | Baler |
| 21 | Conical spoon spring | Baler |
| 22 | Krone pickup spring | Baler |
| 23 | Mascar pickup spring | Baler |
| 24 | New Holland pickup spring — short | Baler |
| 25 | New Holland pickup spring — long | Baler |
| 26 | Piston safety latch extension spring | Baler |
| 27 | Counter clock spring — short | Baler |
| 28 | Counter clock spring — long | Baler |
| 29 | Safety wedge spring | Baler |
| 30 | Wire box spring | Baler |
| 31 | Rake cartridge spring | Baler |
| 32 | Rake comb bar — new model | Baler |
| 33 | Rake comb bar — old model | Baler |
| 34 | U cup connection spring | Baler |
| 35 | Leaf spring | Baler |
| 36 | Spring retaining hook | Baler |
| 37 | 1530 combine harvester pickup spring | Combine harvester |
| 38 | Laverda new model pickup spring | Combine harvester |
| 39 | Laverda old model pickup spring | Combine harvester |
| 40 | TC56 combine harvester pickup spring | Combine harvester |
| 41 | 4.5 mm Seed drill shoe compression spring | Seed drill |
| 42 | 8 mm Z spring | Seed drill |
| 43 | 9 mm Gaspardo soil coverer spring | Seed drill |
| 44 | Gaspardo blade spring | Seed drill |
| 45 | Gaspardo and Kurt type rear coverer spring — short | Seed drill |
| 46 | Gaspardo and Kurt type rear coverer spring — long | Seed drill |
| 47 | İrtem type hoe spring | Seed drill |
| 48 | Swallowtail spring | Seed drill |
| 49 | Conical blade spring | Seed drill |
| 50 | Köymak soil coverer spring | Seed drill |
| 51 | Kurt type soil coverer spring | Seed drill |
| 52 | Marker arm spring | Seed drill |
| 53 | Özdöken and Tarımöz shoe rod spring | Seed drill |
| 54 | Özdöken and Tarımöz hose spring | Seed drill |
| 55 | Single rake tine — short | Seed drill |
| 56 | Single rake tine — long | Seed drill |
| 57 | Soil coverer spring | Seed drill |
| 58 | Hose holder spring | Seed drill |
| 59 | Fimaks type row-independent forage harvester spring | Forage harvester |
| 60 | Forage harvester ball spring — hooked | Forage harvester |
| 61 | Forage harvester ball spring — threaded | Forage harvester |
| 62 | Drum suspension spring | Mower |
| 63 | Hay rake spring plate | Hay rake |
| 64 | Akyollar hay rake spring | Hay rake |
| 65 | Azimli hay rake spring | Hay rake |
| 66 | Çelmak hay rake spring | Hay rake |
| 67 | Fimaks hay rake spring | Hay rake |
| 68 | Gallignani hay rake spring | Hay rake |
| 69 | Gaspardo hay rake spring | Hay rake |
| 70 | Harmak hay rake spring | Hay rake |
| 71 | Hisarlar hay rake spring | Hay rake |
| 72 | Karataş hay rake spring | Hay rake |
| 73 | Krone hay rake spring | Hay rake |
| 74 | Massey Ferguson hay rake spring | Hay rake |
| 75 | Metkarsan hay rake spring | Hay rake |
| 76 | Hay spreading spring | Hay rake |
| 77 | Paksan hay rake spring | Hay rake |
| 78 | Pöttinger hay rake spring — long | Hay rake |
| 79 | Yurdusar hay rake spring | Hay rake |
| 80 | Hay rake spring | Hay rake |
| 81 | Sprayer wing spring | Sprayer |
| 82 | Sprayer boom spring | Sprayer |
| 83 | 10×26 Cultivator spring | Cultivator |
| 84 | 12×22 Cultivator spring | Cultivator |
| 85 | Beet feeler spring | Beet harvester |
| 86 | Peanut harvester spring — large | Beet harvester |
| 87 | Peanut harvester spring — small | Beet harvester |
| 88 | 6 mm Lynch pin | Lynch pins |
| 89 | 8 mm Lynch pin | Lynch pins |
| 90 | 10 mm Lynch pin | Lynch pins |
| 91 | 6 mm D hoe pin | Lynch pins |
| 92 | 8 mm D pin | Lynch pins |
| 93 | 10 mm D pin | Lynch pins |
| 94 | 8 mm Square pin | Lynch pins |
| 95 | Electric fence spring | Other |
| 96 | Elibol turbo baler spring | Baler |
| 97 | Elibol baler spring | Baler |
| 98 | Sönmez turbo baler spring | Baler |
| 99 | Sönmez old model baler spring | Baler |
| 100 | Harmak / Özeniş / Ulutaş turbo baler spring | Baler |
| 101 | Gallignani baler spring — long | Baler |
| 102 | Gallignani baler spring — short | Baler |
| 103 | Cicora baler spring | Baler |
| 104 | Çetinel old model baler spring | Baler |
| 105 | Kayhan Ertuğrul baler spring | Baler |
| 106 | Çokcanlar / Paksan baler spring | Baler |
| 107 | Klaysan harvester spring | Baler |
| 108 | New Holland baler spring | Baler |
| 109 | New Holland harvester spring — TC | Baler |
| 110 | Özapalı mobile thresher spring — old model | Baler |
| 111 | Özapalı mobile thresher spring — new model | Baler |
| 112 | Demireller baler spring — bean | Baler |
| 113 | Öz Bayatlı baler spring | Baler |
No product matches this search. Even if the spring you need is not listed, we can make it — send us the dimensions through the quote form.
Click a row: the product name is carried into the quote form.
Change the values for four spring types: we calculate the spring rate, solid length and spring index instantly. The index is the best indicator of manufacturability — if you go outside the limits, we will tell you.
The calculation is for preliminary assessment and assumes closed-and-ground ends. Binding values are confirmed with a sample and approved technical drawing.
Every step after coiling happens in our own plant. This shortens lead times and keeps quality responsibility in one pair of hands.
Formed in the 0.20–40 mm wire range.
Stress is relieved and elasticity becomes permanent.
Seating faces are flattened on compression springs.
Surface protection against corrosion.
Domestic and international logistics included.
Metiş Yay was founded in 1978 by Mehmet Ertuğrul in a small workshop. Growing quickly on the strength of its quality, it was incorporated in 1998; with an experienced team and a continuously renewed machine park it has reached a daily capacity of 900,000 units.
"Success and continuity in manufacturing are secured by honesty and quality in service."
Mehmet Ertuğrul begins making springs in a small workshop.
Met-İş is incorporated; production volume and machine park grow.
Capacity of 900,000 units per day; domestic and international shipping to five industries.
The eight questions we are asked most on the phone. If yours is not here, write through the form — we reply the same day.
Yes. The catalogue is a list of frequently requested items, not the limit of what we make. Because our coiling line works without tooling dependency, we can produce from a sample, a technical drawing, or simply a photograph of the old spring.
Between 0.20 mm and 40 mm. That range covers everything from electronic contact springs to heavy-duty cultivator springs.
You can. The machine brand, model and where the part works is usually enough. For uncertain items, a photograph of the old spring next to a ruler does the job.
No. Coiling, tempering, end grinding, galvanizing and packaging all happen in our own plant. This shortens lead times and keeps quality responsibility in one pair of hands.
The calculator is for preliminary assessment: it gives the spring rate, solid length and spring index using TS EN 13906 relations. Material strength values are typical values; final production is confirmed against the actual figures in the wire supplier's certificate.
Agricultural machinery makes up the bulk of our catalogue. Alongside that we manufacture for the appliance and electronics, automotive, defence and toy industries.
Yes. Packaging and logistics are handled in our own plant; we ship both domestically and internationally.
Both depend on the size of the product, the coating type and the current production schedule. Send us the item and quantity through the quote form and we will give you exact figures.
Your catalogue selections and the calculator dimensions are carried over automatically. If you do not know the dimensions, leave them blank — just describe where the spring is used.