John Deere Springs
The John Deere items in our catalogue sit in two separate groups: a baler pickup spring and tractor seat springs — all three made to original dimensions.
John Deere items in our catalogue
The items under this make work in two very different places. One is in the field, in the pickup group of a baler; the other two are in the cab, in the suspension of the tractor seat. They sit together not because of a shared mechanical trait but because they turn up in the same machine fleet.
The pickup spring sits in our catalogue as an item shared with Hammer. The reason is that the dimensions coincide: a spare part is a question of dimensions, not of badge. The job of the spring is the same on both machines — press the tine onto the crop — and when it fatigues the first sign is loss of free length, not breakage.
The seat springs are a different world. In a suspension seat the spring carries the operator and absorbs what comes up from the field. Once it loses free length the seat starts bottoming out on rough ground and the shaking through the day increases directly. A seat spring is therefore a part replaced when it is noticed to have sagged, not one waited on until it breaks.
For seat springs the series is what decides: our 5M item stands separately for the 5075M–5115M range, while the Grammer seat item is shared with New Holland. Where there is doubt, a photograph of the old part next to a ruler settles the match, because it shows wire diameter and free length together.
Product list — 3 items
The items below are supplied from stock or made to order. The link at the end of each row carries the product into the quote form.
| No | Product name | |
|---|---|---|
| 18 | Hammer and John Deere pickup spring | Request a quote |
| 115 | New Holland and John Deere Grammer seat spring | Request a quote |
| 116 | John Deere 5M series seat spring — 5075M-5115M | Request a quote |
Photographs from production
Related machine groups
This brand's items sit in the groups below. The group pages also list the other brands produced for the same machine.
How it is made
Every step after coiling happens in our own plant; nothing is outsourced. This shortens lead times and keeps quality responsibility in one pair of hands.
CNC coiling
Formed across the 0.20–40 mm wire range.
Tempering
Stress is relieved; elasticity becomes permanent.
End grinding
Seating faces are flattened on compression springs.
Galvanising
Surface protection against corrosion.
Packing
Domestic and export logistics included.
Frequently asked questions
Is the same pickup spring used for both John Deere and Hammer?
It sits as a single item in our catalogue because the dimensions coincide. A spare part is a question of dimensions, not of badge; as long as the dimensions match, it fits.
How do I know a seat spring needs replacing?
The clearest sign is the seat starting to bottom out on rough ground. The measurable check is comparing free length with the original; there is no need to wait for breakage.
Which range does the 5M item cover?
Our catalogue lists it as 5075M–5115M. For a seat outside that range you need to send dimensions; the series name alone is not enough.
What should I send to order a seat spring?
Seat type, the series if you have it, and the dimensions of the old part: wire diameter, outside diameter, free length and number of coils. A sample or a photograph next to a ruler is the most exact route.
Can you make a John Deere spring that is not on the list?
Yes. Our coiling line works in the 0.20–40 mm wire range with no tooling dependency; we produce from a sample, a technical drawing or a set of dimensions.
Other brand pages
About the brand names
Metiş Yay is an independent spring manufacturer. The machine brand names on these pages are used solely to indicate which machines our products fit; they do not imply any authorised dealership, distributorship or official association with any brand. All brand names belong to their respective owners.
Cannot find the spring you need?
We produce to your dimensions in the 0.20–40 mm wire range, with no tooling dependency. A sample, a technical drawing, or simply a photograph of the old spring is enough.
Fill in the quote formOr call us directly: 0850 840 54 17