Klaysan Springs
The pickup spring working on Klaysan harvesters — part of the group that runs without a break through harvest, made to the original dimensions.
Klaysan items in our catalogue
Klaysan appears in this catalogue with its harvester spring. What separates the harvester group from other agricultural machines is cycle count: a baler makes one full stroke per bale, while a harvester pickup turns continuously through harvest. Of two machines working the same field on the same day, the harvester spring sees several times the cycles.
The practical consequence is that what decides service life here is fatigue, not static strength. The spring does not break under a single overload; it fatigues after millions of small cycles. That makes tempering after coiling even more critical in this group — a spring coiled without stress relief loses its free length in the first harvest and pickup performance drops.
Because the harvest window is narrow, the cost of a failure here is not measured by the price of the part. A day of downtime costs far more than the spring itself. Pre-season checking therefore pays off more on the harvester side than anywhere else: tip wear, widening leg angle and loss of free length, looked at together, allow the decision to be made before the season starts.
To order, the wire diameter, body inner diameter, free length and leg form are enough. A sample is the most exact route; failing that, a photograph of the old part next to a ruler works. The machine make alone is not enough — dimensions can differ between models of the same make.
Product list — 1 items
The items below are supplied from stock or made to order. The link at the end of each row carries the product into the quote form.
| No | Product name | |
|---|---|---|
| 107 | Klaysan harvester spring | Request a quote |
Related machine groups
This brand's items sit in the groups below. The group pages also list the other brands produced for the same machine.
How it is made
Every step after coiling happens in our own plant; nothing is outsourced. This shortens lead times and keeps quality responsibility in one pair of hands.
CNC coiling
Formed across the 0.20–40 mm wire range.
Tempering
Stress is relieved; elasticity becomes permanent.
End grinding
Seating faces are flattened on compression springs.
Galvanising
Surface protection against corrosion.
Packing
Domestic and export logistics included.
Frequently asked questions
Why does a harvester spring fatigue faster than a baler spring?
Because the cycle count is far higher. A baler makes one full stroke per bale; a harvester pickup turns continuously through harvest. Working the same day, the harvester spring sees several times the cycles.
What should I check before the season?
All three together: tip wear, the leg angle widening against the original, and loss of free length. With those three in hand the replacement decision can be made before harvest starts.
Will a Klaysan spring fit another make of harvester?
It fits as long as the dimensions match — the part is a question of dimensions, not of brand. But because dimensions can differ even between models of the same make, matching should be done on dimensions.
Is the machine make enough to order?
Not on its own. Send the wire diameter, body inner diameter, free length and leg form; a sample or a photograph next to a ruler also works.
Can you make a harvester spring that is not on the list?
Yes. Our coiling line works in the 0.20–40 mm wire range with no tooling dependency; we produce from a sample, a technical drawing or a set of dimensions.
Other brand pages
About the brand names
Metiş Yay is an independent spring manufacturer. The machine brand names on these pages are used solely to indicate which machines our products fit; they do not imply any authorised dealership, distributorship or official association with any brand. All brand names belong to their respective owners.
Cannot find the spring you need?
We produce to your dimensions in the 0.20–40 mm wire range, with no tooling dependency. A sample, a technical drawing, or simply a photograph of the old spring is enough.
Fill in the quote formOr call us directly: 0850 840 54 17