Paksan Springs
Springs for Paksan type baler and hay rake groups — including the baler spring listed in our catalogue as a shared Çokcanlar / Paksan item.
Paksan items in our catalogue
The Paksan items in our catalogue fall into two groups: the hay rake pickup spring on one side, and the shared Çokcanlar / Paksan baler spring on the other. The leg angle and long-legged pickup spring photographs in our gallery come from production for this brand.
A baler carries more springs than any other group of agricultural machinery, and each of them does a different job. The pickup spring moves the crop from the ground into the feed channel. The fork spring works in the group that pushes material into the chamber. The pad pressure spring sets bale density. Latch and shear key springs handle safety and timing. One machine, one brand, five spring characters that are not interchangeable — which is why stating where the part sits on the machine is more useful than the brand name when ordering.
This item is listed under two names, Çokcanlar / Paksan, because the same original dimension applies on both machines: a single production covers each of them. Such cross-compatibility is common in the field and makes finding spare parts easier, but it does not hold for every pair of brands — only for items written together in our catalogue.
On the rake side what governs is leg length and leg angle. The gallery photographs show the same body dimension produced with different leg angles. The reason is this: the longer the leg, the lower the moment needed for the same angle, so the spring becomes softer. A spring running with a leg other than the original opens faster than expected in its first season and raking performance falls. Fitting a spring because the body dimension matched, while the leg did not, is a common mistake.
A drop in bale density is often taken for a setting error. If adjustment does not fix it, the pressure group spring is next: a fatigued spring loses free length, produces less force at the same setting, and the bale comes out loose. The quick check is to compare free length against the original.
Product list — 2 items
The items below are supplied from stock or made to order. The link at the end of each row carries the product into the quote form.
| No | Product name | |
|---|---|---|
| 77 | Paksan hay rake spring | Request a quote |
| 106 | Çokcanlar / Paksan baler spring | Request a quote |
Photographs from production
Related machine groups
This brand's items sit in the groups below. The group pages also list the other brands produced for the same machine.
How it is made
Every step after coiling happens in our own plant; nothing is outsourced. This shortens lead times and keeps quality responsibility in one pair of hands.
CNC coiling
Formed across the 0.20–40 mm wire range.
Tempering
Stress is relieved; elasticity becomes permanent.
End grinding
Seating faces are flattened on compression springs.
Galvanising
Surface protection against corrosion.
Packing
Domestic and export logistics included.
Frequently asked questions
Are the Çokcanlar spring and the Paksan spring the same?
The baler spring in our catalogue carries the same original dimension on both machines, so it is listed under both names; a single production covers each. This cross-compatibility does not hold for every pair of brands — only for items written together in our catalogue.
Are the rake spring, the pickup spring and the tine spring different parts?
No, all three are field names for the group that moves the crop from the ground into the feed channel. The rake plate is the sheet part the spring mounts to, not the spring itself.
Bale density has dropped — could a spring be the cause?
It could. If adjustment does not fix it, the pressure group spring may be fatigued: having lost free length, it produces less force at the same setting. Comparing free length against the original is a quick check.
Why does the leg angle matter?
The longer the leg, the lower the moment needed for the same angle, so the spring becomes softer. Even with a matching body dimension, the wrong leg opens faster than expected and raking performance falls. State leg length and angle when ordering.
I do not know my machine model — can I still order?
Yes. Where the part sits on the machine (pickup, fork, pad pressure, latch) is usually more decisive than the model. If you can give dimensions, brand and model are not needed at all.
Can you make a Paksan spring that is not in the list?
Yes. We produce from a sample, a technical drawing or dimensions; you can also attach them to the quote form.
Other brand pages
About the brand names
Metiş Yay is an independent spring manufacturer. The machine brand names on these pages are used solely to indicate which machines our products fit; they do not imply any authorised dealership, distributorship or official association with any brand. All brand names belong to their respective owners.
Cannot find the spring you need?
We produce to your dimensions in the 0.20–40 mm wire range, with no tooling dependency. A sample, a technical drawing, or simply a photograph of the old spring is enough.
Fill in the quote formOr call us directly: 0850 840 54 17